精品国产乱码久久久久久狼|亚洲无码99亚洲激情一级片|日韩av有码无码不卡五区|欧美日韩一级黄片手机免费在线观看

PRODUCT

ENTERPRISE BRIEF INTRODUCTION

HKJL-606 Fault Decoding Protection Measurement & Control Device

PRODUCT OVERVIEW

The device is suitable for the protection measurement and control of interval units

of 110kv and below voltage levels,with perfect  protection,measurement,

control,and communication monitoring functions,providing a complete solution for the protection and control of substations,power plants,high and low voltage power distribution and plant power systems,which can effectively ensure the safe and stable operation of high and low voltage power grids and plant power systems.Can and other protection,The automation equipment together forms the automation system through communication interfaces,it can be installed on a group screen or separately in a high and low voltage cabinet.

Fault delineation protection devices are used more often in hydropower and

Stable operation,large hydropower and thermal power such protective devices are required.When a power station is connected to the grid,it is used to complete the safe and accurate grid connection of the power station (that is,the pressure difference,angle difference,and frequency difference on both sides meet the requirements),When the grid connection is completed,the fault de-column starts to run its own function,detects the voltage and current problems of the grid-connected bus or line,and jumps off the grid-connected point switch after reaching the fixed value.So that the station is separated from the power grid,the delising function is completed,and the grid connection point switch is jumped.

KEY FEATURE

  • Shockproof,dustproof and anti-interference
  • RS485,MOD BUS communication
  • Up to 150 event recording
  • Extremely low power consumption 

 Rated Working Voltage

AC220V, DC220V or DC110V

 Rated Technical Parameter

AC current 5A or 1A,AC voltage 400V or 100V,frequencey:50Hz

 Power Dissipation

≤5w when working,≤10w when protecting, AC current loop: 

<1VA/phase, (IN=5A),<0.5VA/phase (IN=1A)

 Working Range

Current: 0.041--20In,

Voltage: 0.4V--1.2Un,

Frequency: 0.9--1.1Fn,

Time: 0--100s.

Accuracy of Protection Part

Setting Accuracy: ≤±5%, time accuracy: ≤±1%, Setting time: 35mS,

Whole Group Action Time: ≤35mS, Frequency: ≤±0.50.01Hz

Measurement & Control Accuracy

AC Value Accuracy: ≤±0.2%,

Active/Reactive: ≤±0.5%

Switch Value Input

Mode: passive number of optically isolated inputs: 16

Working Voltage: AC 220V, DC 220V or DC 110V

 Relay Input

Contact Capacity: AC250V/DC 220V 5A mode: passive(empty contact)

Communication Interface & Protocol

RS485, Modbus RTU, Baud Rate: ≤1Mbps

Environment

Temperature: -25℃~70℃  

Humidity: 5--95% RH

 

           Front View                                     Aperture size    

 

HKJL-606 Fault Decoding Protection Measurement & Control Device